Building Van’s Aircraft tutorials #1 – 16 can also be viewed on our YouTube Channel: Adventures in Aviation
1) Horizontal Stabilizer Repair for Van’s RV-6, RV-7, and RV-8 Aircraft
2) How to Roll the Leading Edge on Your Van’s RV-7 Elevator
3) Countersinking Tips for Flush Rivets
4) Deburring Techniques for Sheet Metal Using Basic Hand Tools
5) How to Remove Protective Plastic from Sheet Metal
6) Tips for Using Solid Rivets Instead of Pop Rivets on the Aileron of Van’s Aircraft RV-7
7) Drilling Z Brackets for Attaching the Fuel Tank for Van’s RV-7, RV-8, and RV-9 Aircraft
8) Drilling Conduit Holes for Wiring Through the Wing of Van’s Aircraft RV-7
9) Preparing the Wing Ribs for Van’s Aircraft RV-7
10) Cutting and Trimming the Aileron Stiffeners for Van’s Aircraft RV-7
11) How to Replace Rivets During Fuel Tank Construction
12) 1/8 inch NAS10947Head – OOPS Rivet
13) How to Flare Aluminum Tubing
14) Drilling Holes in the Joint Plate for the RV-7 Wing
15) Final Sizing the Holes for the RV-7 Fuel Tank
16) My Top 3 Favorite Aircraft Building Tools